High Roll Trapeze is a single layer trapeze made of painted galvanized sheet or galvanized sheet. This form, which is within the scope of special production, is used as a formwork under reinforced concrete as well as roof and facade.
High Roll Trapeze is a single layer trapeze made of painted galvanized sheet or galvanized sheet. This form, which is within the scope of special production, is used as a formwork under reinforced concrete as well as roof and facade.
Property | Value |
---|---|
Production Location | Istanbul |
Usable Width | 685 mm |
Minimum Length | 1 meter |
Maximum Length | Depends on shipping conditions. |
Metal Type | Painted Galvanized Sheet |
Top Metal Thickness | 0.70-1.50 mm |
Steel Surface Yield Strength | min. 220 N/mm2 |
Thickness Tolerance (EN 10143) | Nominal |
Length Tolerance | ±3 mm |
Sheet Quality (EN 10327) | DX51 D+Z Painted Galvanized Sheet (topcoat with polyester paint) |
Hot Dip Coating Amount (EN 10327) | 100-275 gr/m2 |
Paint Type | Polyester, PvdF, Plastisol, PVC |
Property | Value |
---|---|
Production Location | Istanbul |
Usable Width | 685 mm |
Minimum Length | 1 meter |
Maximum Length | Depends on shipping conditions. |
Metal Type | Painted Galvanized Sheet |
Top Metal Thickness | 0.70-1.50 mm |
Steel Surface Yield Strength | min. 220 N/mm2 |
Thickness Tolerance (EN 10143) | Nominal |
Length Tolerance | ±3 mm |
Sheet Quality (EN 10327) | DX51 D+Z Painted Galvanized Sheet (topcoat with polyester paint) |
Hot Dip Coating Amount (EN 10327) | 100-275 gr/m2 |
Paint Type | Polyester, PvdF, Plastisol, PVC |