55/225 trapeze, which has a 55 mm roll height and gains extra strength thanks to the second bend on the roll, is the most suitable material especially for roofs with wide purlin spacing.
55/225 trapeze, which has a 55 mm roll height and gains extra strength thanks to the second bend on the roll, is the most suitable material especially for roofs with wide purlin spacing.
| Properties | Value |
|---|---|
| Production Location | Istanbul |
| Usable Width | 900 mm |
| Minimum Length | 1 meter |
| Maximum Length | Dependent on transportation conditions. |
| Metal Type | Painted Galvanized Sheet |
| Upper Metal Thickness | 0.50-1.00 mm |
| Steel Surface Yield Strength | min. 220 N/mm² |
| Thickness Tolerance (EN 10143) | Nominal |
| Length Tolerance | ±3 mm |
| Sheet Quality (EN 10327) | DX51 D+Z Painted Galvanized Sheet (top coat over polyester paint) |
| Hot Dip Coating Amount (EN 10327) | 100-275 gr/m² |
| Paint Type | Polyester, PvdF, Plastisol, PVC |
| Properties | Value |
|---|---|
| Production Location | Istanbul |
| Usable Width | 900 mm |
| Minimum Length | 1 meter |
| Maximum Length | Dependent on transportation conditions. |
| Metal Type | Painted Galvanized Sheet |
| Upper Metal Thickness | 0.50-1.00 mm |
| Steel Surface Yield Strength | min. 220 N/mm² |
| Thickness Tolerance (EN 10143) | Nominal |
| Length Tolerance | ±3 mm |
| Sheet Quality (EN 10327) | DX51 D+Z Painted Galvanized Sheet (top coat over polyester paint) |
| Hot Dip Coating Amount (EN 10327) | 100-275 gr/m² |
| Paint Type | Polyester, PvdF, Plastisol, PVC |
